Electrician use basic tools | 15 Basic Electrical tools


Electrician Use Basic Tools

Electrical tools are used to do the trade like electrical wiring installations by using this tool we are going to do the installation of electrical wire properly and quickly. We must be able to choose the correct equipment or tools to undertake to to the trade then only the quality of our work will improve. By using electrical tools we could do the electrical tasks effortlessly.

What are the fundamental electrical tools


Pliers is used for cutting, twisting, bending, holding, and gripping of wires and cables. The handles of the pliers are going to be insulated and it can’t be considered as sufficient protection. There are differing kinds of pliers.

Side cutting pliers is used for cutting electrical wires and little nails. Longnose pliers is used for cutting and holding of fine wires and that they may be utilized in tight space, these varieties of pliers are commonly used for creating terminal loops in copper wire. Diagonal pliers are used for cutting medium or fine wires they're also employed in bending small faces of soppy metal.

Wire strippers

Wire strippers are accustomed remove the insulation of wires, mostly medium-sized wires starting from gauge 10 to measure 16. Wire strippers are accustomed remove the insulation of rubber covered wires from gauge 26 to measure 10.

Electrician Knife

These knives are utilized by lineman to get rid of the insulation of huge cables in high and low voltage transmission lines.


Screwdrivers are often wont to loosen or tighten screws with slotted heads, screwdrivers are in various size and shape. Screwdrivers are made from steel and that they are tempered at the tip. per the scale and shape of screw differing kinds of screwdrivers are used.

Screw Driver


Hammers are tools which are used for pounding and family planning of nails, there are soft and hard-faced hammers. Hard faced hammer will be accustomed knock objects and that they have a cylindrical-shaped head. The soft-faced hammer is employed for the rewinding process. Mostly soft-faced hammers are made of rubber or plastic. There are differing kinds of hammers sort of a claw hammer, ball peen hammer and mallet.


Electric drill

These devices are accustomed drill holes in metal sheets and concrete walls, they'll be wont to make holes in building structures for the passage of wires and conduit. they'll be useful for indoor and outdoor wiring.

Electric Drill


Wirepullers are accustomed manipulate into conduit or raceways, these devices are very helpful for wire pulling.

EMT bender

EMT bender may be wont to bend electrical metal tubing, it may well be able to do back to backbend in conduits, they will also do saddle bend and might be wont to straighten the conduit.

Soldering iron

Soldering tools is accustomed make splices and tap connections in wires. Many connections are often through with the assistance of this device. Soldering must be done perfectly so as to induce a stronger connection.

Soldering iron

Wire gauge

Wire gauge are often wont to measure the thickness or diameter of the wires, it are often employed in sizing conductors. The gage is wont to measure from gauge 0 to 36.


Hacksaws is wont to cut metal conduit and armored cable, it may also be accustomed cut the little and medium-sized metals.


Voltage tester

Voltage tester are often called as a significant tool for an electrician, a voltage tester is employed to test if there's voltage in an exceedingly wire or in a very conductor before using it. Digital voltage testers are available which shows the presence of an electrical field. Voltage testers don't seem to be accustomed measure high-level voltages usually they're not accustomed measure voltages exceeding 250volts.


A multimeter will be wont to measure voltage, current, resistance, and capacitance, conductance, a frequency so this instrument could measure the majority things which is required for an electrician. This meter can show the precise reading too. There are digital and analog multimeters are available within the market.



A micrometer is wont to measure small and huge sizes of wires, it's also accustomed remove the diameter of circular wires. A micrometer can measure the diameter of thin wire accurately or thickness of sheet.


Wrenches are instruments which will be wont to turn nuts or hold the piece of stock when tightening screws, nuts, and bolts. There are differing kinds of wrenches like adjustable wrenches, adjustable spanner, vise grip wrench.

Adjustable Wrench


Popular Posts

Top 10 Transformers Manufacturers in INDIA

On what principle does an electric heater work?

How does an electric metre work?