Capacitor | Types and Working Principle


What is Capacitor?

A Capacitor Bank may be a group of several capacitors of the identical rating that are connected nonparallel or parallel with one another to store electricity . The resulting bank is then wont to counteract or correct an influence factor lag or phase shift in and electricity (AC) power supply. they'll even be utilized in a right away current (DC) power supply to extend the ripple current capacity of the facility supply or to extend the general amount of stored energy.


That one capacitor does; they're designed to store electricity, just at a greater capacity than one device. a private capacitor consists of two conductors which are separated by a dielectric or insulant. When current is distributed through the conductors, an electrical field that's static in nature then develops within the dielectric which acts as stored energy. The dielectric is intended to allow a predetermined amount of leakage which is able to gradually dissipate the energy stored within the device which is one amongst the larger differences between capacitors and batteries.

Principle of Capeciter

How is Capacitance Measured?

Capacitors are rated by the storing characteristic mentioned as capacitance which is measured by the scientific unit, Farad. Each capacitor will have a hard and fast value that they're rated at storing which may be utilized in combination with other capacitors in an exceedingly capacitor bank when there's a major demand to soak up or correct AC power faults or to output DC power.

What are the Applications of a Capacitor Bank?

The most common use of a capacitor bank for AC power supply error correction is in industrial environments which use an outsized number of transformers and electric motors. Since this equipment uses an inductive load, they're liable to phase shifts and power factor lags within the power supply which might end in a loss of system efficiency if left uncorrected. By incorporating a capacitor bank within the system, the facility lag are often corrected at the most cost effective cost for the corporate compared to creating significant changes to the corporate power system or system that's supplying the equipment. Other uses for capacitor banks include Marx generators, pulsed lasers, radars, fusion research, nuclear weapons detonators, and electromagnetic railguns and coilguns.

Types of Capacitor

Polarised Capacitors

Must be connected the proper way round in a very DC circuit, and not in the least in an AC circuit

  • Wet electrolytics
  • Sintered metal electrolytics
  • Supercaps (details probably proprietary
  • pn junction capacitance (tuning diodes, or MOSFET gates)

Non - polarised capacitors

Are often used either way round

  • Silvered mica
  • Paper
  • Metalised wrap
  • Ceramic
  • Air-spaced, including variable capacitors

Parasitic , or stray, capacitance (not, of course, polarised). The inevitable consequence of conductors in proximity.

Big Capeciters

Intrinsic substrate capacitance

A sort of stray capacitance that affects the traces and interconnects on semiconductor dies, the elemental reason why the speed of chips has an upper limit. This is, of course, polarised, but can't be oriented incorrectly because the polarities are already established. A variation on pn junction capactance.

There also are some oddities. you will hear of a non-polarised electrolytic, typically employed in single phase motor starting . There is, of course, no such thing. it's just two polarised electrolytics back to back, to create a package smaller than the equivalent paper version, and with an unremarkable short life. you will hear of an oil-filled capacitor. this can be only one of the others, with oil accustomed improve thermal handling, improve dissipatio. it's perfectly possible to simulate capacitance with an inductor and an op-amp, though rarely useful.

Principle of Capacitor

Take an insulated metal plate A. Charge the plate to its maximum potential. Now take another insulated plate B. Take the plate B nearer to plate A. you may observe that charge are going to be produce on the plate concerning plate A and therefore the same amount of charge are going to be produced on the opposite side of plate B.

Now the plate B will start affecting the plate A slowly. The charge will start decreasing the electrical potential of plate A. But charge helps in increasing the potential. But the effect of electric charge is far quite that of the positive because the negative side of plate is regarding the plate A. So potential of A will start decreasing and it is charged again to boost its potential to maximum.

Lets take an another discussion over it. Now during this case connect the plate B to earth. All the charge present on plate B will get into the planet. So, only electric charge will remain on the plate B. that the potential of plate A will abate to a greater extent. So as a result A will want rather more charge to realize its lost potential because of the effect of the electric charge present on plate B.


Popular Posts

Top 10 Transformers Manufacturers in INDIA

On what principle does an electric heater work?

How does an electric metre work?